Snabba leveranser

Telefon: 0660-82810

Snabba leveranser

Telefon: 0660-82810

Snabba leveranser

Telefon: 0660-82810

Moms

Blogg Kampanj Outlet

0 kr

Edelbrock

Insug

Performer 351 Cleveland 4V Intake Manifold for Ford Cleveland Small-Block 351-C and Boss 351 Fords that came stock with 4V carb and heads

Artikelnummer: EDL2665

Inkl. moms6 148,00 kr

Exkl. moms4 918,40 kr

I lager (2)

For Ford Cleveland Small-Block 351-C and Boss 351 Fords that came stock with 4V carb and heads

Edelbrock part #2665 Performer 351-4V intake manifold is designed for street 351C and Boss 351 Fords that came stock with 4V carb and heads. Manifold will fit Boss 302 or accept stock Motorcraft spread-bore carb. End-seal flange width measures 6-31/32". Edelbrock's Patented Dual-plane low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars trucks 4x4s tow vehicles and RVs.

Finish:Satin

Series:Performer

EGR Port:No

Material:Aluminum

CNC Ported:No

Grade Type:Performance

Flange Type:4150

Vehicle Model:Ford

Rear Maximum Height:4.300 Inch

Front Maximum Height:3.500"

Center Maximum Height:3.900"

Gasket Or Seal Included:No

Basic Operating RPM Range:Idle-5500 R3

Single Or Dual Plane Type:Dual

For Ford Cleveland Small-Block 351-C and Boss 351 Fords that came stock with 4V carb and heads

Edelbrock part #2665 Performer 351-4V intake manifold is designed for street 351C and Boss 351 Fords that came stock with 4V carb and heads. Manifold will fit Boss 302 or accept stock Motorcraft spread-bore carb. End-seal flange width measures 6-31/32". Edelbrock's Patented Dual-plane low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars trucks 4x4s tow vehicles and RVs.

Finish:Satin

Series:Performer

EGR Port:No

Material:Aluminum

CNC Ported:No

Grade Type:Performance

Flange Type:4150

Vehicle Model:Ford

Rear Maximum Height:4.300 Inch

Front Maximum Height:3.500"

Center Maximum Height:3.900"

Gasket Or Seal Included:No

Basic Operating RPM Range:Idle-5500 R3

Single Or Dual Plane Type:Dual

Relaterade produkter

InsugEDL5066 – Torker II 460 Intake Manifold for Ford 429/460 Big-Block V8Edelbrock

6 848,00 krinkl. moms

InsugNCU7102645 – INSUG CHEV BB TORKER 4500 2-RNorrlands Custom

12 459,00 krinkl. moms

InsugEDL2131 – Performer AMC Intake Manifold for 1970 and Later 304-401 c.i.dEdelbrock

6 519,00 krinkl. moms

InsugNCU900615179 – GM 3.8l V6 plastNorrlands Custom

3 669,00 krinkl. moms

InsugEDL5419 – C-357-B Triple-Deuce Intake Manifold for 4-Bolt Carbs For Chevrolet 262-400 Small-Block V8 with 1955-1986 Cast Iron Cylinder HeadsEdelbrock

9 848,00 krinkl. moms

InsugEDL7193 – Performer RPM Intake Manifold for Chrysler 413-426-440 Big-Block V8Edelbrock

6 299,00 krinkl. moms

InsugDOR615-181 – GENERAL MOTORS 2005-96Dorman - OE Solutions

2 874,00 krinkl. moms

Beställningsvara

InsugEDL7576 – RPM Air-Gap Intake Manifold for 318-340-360 Chrysler Small Block LA enginesEdelbrock

6 899,00 krinkl. moms

InsugEDL2971 – Super Victor 4500 for Raised Port 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8Edelbrock

6 994,00 krinkl. moms

InsugEDL2161 – Performer 2-0 Intake Manifold for 1965-90 Big-Block Chevrolet 396-502 Engines with Oval Port HeadsEdelbrock

5 749,00 krinkl. moms